AutoCAD Beyond the Basics
AutoCAD/AutoCAD LT Beyond the Basics continues on from the topics covered in the AutoCAD/AutoCAD LT Essentials training guide. It covers more sophisticated techniques that extend your mastery of the program.
AutoCAD and AutoCAD LT Essentials
Our AutoCAD and AutoCAD LT courses are designed for new AutoCAD software users, who require comprehensive training. The training incorporates the features, commands, and techniques for creating, editing, and printing drawings with AutoCAD / AutoCAD LT. Hands-on exercises throughout the course explore how to create 2D production drawings.
Inventor Introduction to Solid Modelling
This course covers the fundamental principles of 3D parametric part design, assembly design, and creating production-ready part and assembly drawings using Autodesk Inventor.
Autodesk Revit Architecture Fundamentals
This course covers the main features, commands and techniques for using Autodesk Revit.
Autodesk Inventor Sheet Metal Design
This course covers the fundamental principles of sheet metal design using Autodesk Inventor.
This training course is designed to allow new users to understand the capabilities and operations of Navisworks as a project review tool. Autodesk Navisworks Essentials course instructs delegates in 3D geometry from cross disciplines and undertaking effective model reviews.
Autodesk Inventor Stress Analysis
This course will cover the basic and advanced functionality of Stress, Model and Frame Analysis.
AutoCAD P&ID Administration Essentials
In this training delegates learn how to use the AutoCAD P&ID 2015 software product to administer P&ID design projects. This training includes lessons, exercises and review questions. The training provides a focus on project setup and administration.
Fabrication CADmep for New Users
In this training delegates will learn how to use Autodesk Fabrication CADmep. Autodesk Fabrication CADmep software supports detailing, fabrication, and installation workows for mechanical, electrical, and plumbing (MEP) contractors. It provides tools that extend design-intent to create more accurate, intelligent, constructible models of building service systems.
Autodesk Inventor Dynamic Simulation
This course will cover the basic and advanced functionality of dynamic simulation. After a thorough introduction of the simulation workflow and user interface of dynamic simulation the course will mainly focus on solving actual design problems.
AutoCAD Update Training
This training course covers a range of general improvements and command enhancements to 3D modelling and collaboration enhancements.
Autodesk Introduction to FEA Principles
Delegates will gain a solid foundation in the basic theory and application of the finite element method to structural mechanics. The course is not code specific and will not address in-depth theory, making it an ideal vehicle for those wishing to develop their understanding further.
Autodesk 3ds Max Design Fundamentals
This course covers all features within 3ds Max Design. Delegates learn how to use basic modelling techniques, change 2D models to 3D, understand maps and materials, look at the fundamentals of lighting and walkthrough animations. Hands-on exercises representing real world scenarios are included.
Introduction to Plant Design
In this training, delegates will learn how to use the AutoCAD P&ID, AutoCAD Plant 3D 2 and Autodesk Navisworks software products to complete a plant design project. This training course provides a comprehensive overview that includes all common workflows for plant design plus a focus on project setup and administration.
Autodesk Inventor for 3D CAD Users
This training is intended to provide accelerated introductory training in the Autodesk Inventor software. Delegates will acquire the knowledge needed to complete the process of creating models from conceptual sketching, through to solid modelling, assembly design, and drawing production.
Autodesk Inventor Advanced Assembly Modelling
This course covers the fundamental principles and recommended workflows for creating dynamic simulations of mechanisms using Autodesk Inventor Professional.
Inventor for Experienced 3D Users
Parametric design of parts and assemblies is an accepted technology that improves quality, reduces the need to produce physical prototypes and eliminates almost all of the drawing involved in preparing manufacturing documentation.
This course is designed to provide an introduction to the functionalities and capabilities within Autodesk Nastran In-CAD.
Autodesk Inventor iLogic
In this course delegates will learn how to use the iLogic functionality that exists in the Autodesk Inventor software.
Vault Data Management for Administrators
An Autodesk accredited course, focusing on capabilities for managing Design Files and related documentation. Hands-on exercises are included to reinforce how to manage the Design Workflow Process using Autodesk Vault Basic. Students are taught how to Locate, View, Modify, Create, Copy and re-use Files.
Vault Data Management for Autodesk Inventor Users
This course covers all features in Autodesk Vault for managing files and projects. Delegates learn how to organise and share files, manage file versions, work in multi-user environments and integrate Autodesk Vault with Inventor. The course will also include how to install and manage Autodesk Vault and its file structure.
Revit Family Creation for Manufacturers
A Revit family is a graphic representation of construction industry objects and symbols. It can include geometry in 2D or 3D as well as data (Properties) that supports the definition and creation of object instances.
Autodesk Inventor Advanced Part Modelling
In this training delegates will consider various approaches to part design. Specific advanced part modelling techniques covered will include multi-body design, advanced lofts, advanced sweeps, coils and surface modelling.
Autodesk Inventor Professional Simulation
This course covers Stress Analysis and recommended work-flows for understanding creating dynamic simulations of mechanisms using Autodesk Inventor Professional.
AutoCAD Electrical Fundamentals IEC
The AutoCAD Electrical Fundamentals training course covers the indispensable core topics for working with the AutoCAD Electrical software. In addition, delegates are introduced to methods of customising AutoCAD Electrical symbols, circuits and databases. Other topics covered include titleblock linking, reporting tools, templates and project files.