eCADSTAR - Routing - Automatic Via Flood

Watch this video on YouTube

 

Video Transcript

In this video we take a look at eCADSTARS ability to be able to automatically flood copper areas with vias. An extremely useful, timesaving feature for stitching together ground or power planes.

 

First of all I go to the padstack tab and select reinforcing via.

So we have a few options here. I can flood the inner, the perimeter or all of the board.

We can choose which specific via we would like to use. We can also change the layer span here and we can also configure our via matrix.

The software prompts us to select two pieces of copper. This is an 8 layer board and we are only looking at 1 and 8 right now. But if the copper existed on more layers it will also connect to the additional layers. Or provide clearance if a connection is not needed.

As soon as the second copper shape is selected eCADSTAR builds a preview image for us so we can review the matrix. Whilst still in preview mode I can change the matrix dimensions so I can review each result and finally commit to adding them to my design.

Now I’ve committed the vias to my design then still work within the rules of our DRC and can be pushed out of the way or even deleted.

Recent Blog Articles


Need more information or advice?

Fill in your contact details below and we will call you


 

Latest News

20 Years of Quadra - Celebrating 20 years in business

Jan 15, 2020

Quadra Solutions celebrate 20 years in business. The Accrington-based design firm was set up in 1999 by four founding members, Steve Dobson, Simon Dobson, Rob Hargreaves and Keith Watkins, all of whom are still with the company today.

Upcoming Events

eCADSTAR Roadshow - Manchester

Jan 20, 2020

Join us for Quadra Solutions will present and demonstrate Zuken's vision for the future of PCB Design.

Latest Tweets

Follow us on Twitter @QuadraSolutions